The Suorin Air Pro pod kit is an open Mouth to Lung (MTL) pod system vape device that has a maximum 18W non-adjustable output. It is incorporating an internal 930mAh battery. Dual-activated -- both auto-draw and fire button operated allowing two slightly different styles of vaping.
In January 2021, Suorin officially released a new Suorin open pod system kit -- Suorin Air Pro.
1.When you get the package, please check all the packages to make sure all the accessories are ready
read the Suorin
Air Pro Use manual before you use it
2.Connect the device to a charging port to charge the battery (Micro-USB cable included). When the indicator LED light stays green, it is the fully charged battery.
3.Take out the empty pod from the cartridge package and take away the packaging film
4.Fill in your favorite e-liquid.
5.Let the pod cartridge sit for around 5-10 minutes for the coil to absorb the liquid cotton fully.
6.Attach the cartridge to the vape.
7.Click the power button five times to turn it on or use its auto-draw mode to start it.
8.Inhale and enjoy your vaping journey!
Turning on the Suorin air pro pod device is simple. Suorin Air pro has 2 modes to turn it on. One is the auto-draw mode, draw to start it, it is susceptible and works every time! One is the button draw mode. Just press its power switch exactly 5 times continuously in 2 seconds to turn on the device and begin vaping. And you can press the fire button 5 times continuously in 2 seconds to turn it off.
1.Unplug the silicone plug. Lightly snap sides, then pull off.
2.Pinch the sides of the cartridge with your fingers when filling
3.Please wait 5-8 minutes after filling the e-liquid into a new cartridge to make sure the cotton is fully saturated
Suorin Air Pro comes with a micro USB cable, you can charge it with this micro USB cable. If you have a pogo magnetic charger, you can set it with the pogo charging dock for its supposes pogo charging option design.
The vape device is normally to be dirty in our daily use. If you find the Suorin Air Pro is dirty
something, you can use the tissue or wet wipes to clean it away. If you want to clean the Suorin Air
pods, you can
follow the steps below:
1.To clean a Suorin Air pro pod, remove the pod from the device and gently brush away any debris with a dry toothbrush.
2.If needed, you can use a small amount of isopropyl alcohol on a cotton swab to clean the inside of the pod.
3.Let the pod dry completely before reinserting it into the device.
Suorin Air Pro kit comes with a pod battery body and a pod cartridge. They connect tightly by the magnetic contacts when you installed them. If you want to take apart them, you just need to hold their body and pod cartridge with your hands and simply take them apart from different sides.
Suorin air pro pods have an LED light feature on their power button. The LED light feature indicates the battery charge level of the device so that you can know when the device is running low on battery and needs charging. When you charge the Suorin device or take a draw from it, you will notice the LED feature lighting up. Here are the LED colors that you will see on your Suorin air pro as well as their meaning:
When you are charging, if the indicator light can stay green stably, it means the Suorin Air Pro is fully charged!
When the Air Pro device’s battery cannot be charged, check that the charger cord is fully connected to the micro USB port. If yes, you can reconnect it carefully. Or not, you can try to change to another micro USB cable to change it. If it still can't work, you can contact the Suorin team to fix it!
During charging, if the battery power is remaining at 41%-95%, the battery indicator light will blink
During use, if the battery power is more than 41%, the battery indicator light will blink green.
During charging, if the battery power is remaining at 10%-40%, the battery indicator light will blink
During use, if the battery power is remaining at 10%-40%, the battery indicator light will blink blue.
uring charging, if the battery power is less than 10%, the battery indicator light will blink
During use, if the battery power is less than 10%, the battery indicator light will blink red.
When air pro vaping time exceeds 5 seconds, the indicator light will blink 10 times and vibrate 1
There is no atomizer detected, the indicator light will blink 8 times.
If the air pro Ohms is too low, the indicator light will blink 5 times.
When the battery is low, the indicator light will blink 3 times.
Turn on /Turn off the device, the indicator light will blink 3 times and vibrate 1 time.
Insert its replacement cartridge, the indicator light will blink 1 time and vibrate 1 time.
Plugged in the charger, the indicator will keep blinking and vibrate 1 time.
Suorin Air Pro Pods are recommended to change/replace after filling e-liquid 5-8 times or within 7 days after e-liquid filling. If you use it as daily use, maybe it can long last about 2 weeks depending on the frequency of your vaping as well as the flavor.
Suorin Air Pro has been designed on liquid leakage-proof. In general, you needn’t worry about the
leaking problem. But
it still has many reasons to cause it to leak including:
1. Vapers tighten the air pro pod cartridge too much and damage the rubber rings that create the seal, leading to leaks
2.The chimney on the device is the hollow tube inside the cartridge
3. Vapers constantly suck on the device, generate more heat and force more liquid through the coil.
4.Overuse or chain puffing can lead to leaks
5.Broken seals and poor-fitting seals
There are many reasons that can cause a vape device to taste burnt. Based on Suorin Air Pro, there
be the reasons
1.Vape without filling enough e-liquid or didn't wait 5-8 minutes after first filling the Suorin Air Pro Pod cartridge and the coil cotton didn't situate.
2.Vaping too quickly, the air pro is not able to keep up with the speed and strength of the draw on it.
3.Vaping the Wrong Kind of E-Liquid
4.The Air Pro pod cartridge only lasts so long and it needs to be replaced.
If the aerosol is not emitted normally when puffing on the device:
A. Confirm that the cartridge is properly in place and tightly connected to the device.
B. Confirm that the device is under the “on” state.
C. Confirm that sufficient e-liquid remains in the cartridge. If not, refill the cartridge.
D. Confirm that adequate charge remains in the battery. If not, please charge as soon as possible.
If the product still does not work, email our customer service center at firstname.lastname@example.org or email@example.com for further assistance.